GLB, glTF, OBJ, STL, FBX, PLY, 3MF, DAE, USDZ, ZIP · up to 250 MB · or drop it here
Pick an OBJ with its MTL and textures, or a glTF with its .bin, in one go. A ZIP that holds them works too.
Or try a model made on this site
Drop a 3D model to convert it. The file stays in this tab; nothing is uploaded.
STL to 3MF converter
The STL to 3MF converter repackages an STL as a 3MF in your browser. The triangles are the same, but each vertex is listed once and the file states that its unit is the millimetre. Binary and ASCII STL are read, and nothing is uploaded.
STL to 3MF in numbers
A cube in an STL lists 3 corners for each of its 12 triangles; the 3MF welds them to the 8 real corners.
Measured on a 3,968-triangle sphere: 198,484 bytes as binary STL, 32,877 bytes as 3MF.
The 3MF model element states unit="millimeter", where an STL states nothing.
Binary STL and ASCII STL both open, as millimetres.
Watch an STL become a 3MF
This page, recorded and played about 1.25 times faster.
Treasure chest, STL to 3MF
The chest's 26,942 triangles go into a 310.7 KB 3MF, Z-up in millimetres at 832 × 519 × 758 mm, the size it was opened at; a print height chip would scale it before saving. Repair for printing, Add a base and Cut with a plane are offered next.
What carries over
What survives STL to 3MF
Nothing is lost, because an STL holds only triangles.
| What | What happens |
|---|---|
| Every triangleKept | The same triangles are written, with no decimation, hole filling or reorientation. |
| Size in millimetresKept | An STL's numbers are read as millimetres and written as millimetres, or scaled to 28, 50, 100 or 180 mm tall. |
| Z-up orientationKept | STL and 3MF are both Z-up, so the part stands the same way on the slicer bed. |
| No color appearsNothing to carry | The 3MF is one gray object. An STL has no color to carry, so none is invented. |
What a 3MF adds to the same triangles
Three differences between the two files, all structural.
Shared vertices
A binary STL stores 50 bytes per triangle with every corner repeated. A 3MF lists each welded vertex once and the triangles index into the list.
A unit in the file
STL leaves the slicer to assume millimetres. The 3MF writes unit="millimeter" into its model, so a wrong-scale import has one less cause.
A ZIP of XML
The package holds a content-types file, a relationships file and the 3D model as XML, deflated into one .3mf.
From an STL to a 3MF in three actions
The output is already set to 3MF on this page.
- 1
Pick or drop a binary or ASCII .stl. The page reads its size in millimetres.

- 2
Leave Original size, or choose 28, 50, 100 or 180 mm to scale the part exactly.
- 3
The 3MF downloads with the height in its name when you set one.

Limits of STL to 3MF conversion
The 3MF is a repackaging, not an upgrade of the geometry.
Holes stay holes
Welding vertices shares the corners an STL repeated, but it does not close gaps; the repair tool does that.
One object, one color
Multiple parts, per-face colors and printer settings are not written; the vertex-color tool writes a multicolor 3MF.
The unit is assumed on the way in
An STL does not say whether it was modeled in millimetres, so a part exported in inches opens at 25.4 times too small; choose in under Treat the file’s units as to read it at its real size.
Questions about STL to 3MF
Answers about size, units and color.