GLB, glTF, OBJ, FBX, 3MF, STL, PLY, ZIP · up to 250 MB · or drop it here
Open a colored model to split its colors into filaments. It never leaves your device.
Free texture to vertex color converter
Turn a textured 3D model into the handful of colors a multi-material printer can print. The texture to vertex color converter samples every triangle, suggests how many filaments the model needs, keeps small marks such as eyes, folds away color specks thinner than your nozzle, and downloads a 3MF that Bambu Studio, OrcaSlicer and PrusaSlicer read as filament assignments. It runs in your browser and every download is free.
The texture to vertex color converter in numbers
Pick 1 to 8, 12 or 16, or take the suggested count; one AMS unit holds 4 spools.
Bambu Lab PLA Basic and PLA Matte swatches from the BambuStudio color database, plus the spools you save.
A slicer 3MF with filament colors, a plain 3MF, OBJ with vertex colors, GLB or a one-color STL.
Each plate size comes from the maker's spec page, so the fit check says how far a print is over.
Set the print height; width and depth follow and the size is shown.
Converted in your browser tab; no upload and no paid download.
One textured robot split into filament colors
Screenshots of this converter on the robot that Try with a sample model loads, at its suggested settings. Nothing was repainted: each view is what the tool shows before you download.
How it works
How texture colors become filament colors
A slicer cannot print a texture image; it prints one filament per region of the surface.
Sample each triangle
Every triangle takes its texture's color at four points inside it, times the material and vertex color, which keeps seams from bleeding in.
Cluster by eye, keep the marks
Colors are grouped in CIELAB, where distance matches how different two colors look. Seeds are the most distinct colors that cover a visible share, so an eye or a logo keeps its own spool.
Drop specks thinner than the nozzle
A patch of color narrower than your nozzle at the printed size prints as a smear, so it is folded into the neighbour it shares the longest border with.
Match your spools
Hover a swatch to light its area on the model, then set it to a real filament, one you saved, or any color; the preview and the files follow.
Which file to download for your slicer
Every file carries the same palette and the same millimetre size.
| File | Colors carried as | Opens in |
|---|---|---|
| 3MF for Bambu Studio, Orca, PrusaRecommended for printing | A paint_color code per triangle, filament colors in the project settings | Bambu Studio, OrcaSlicer and PrusaSlicer, with no dialog |
| Plain 3MFStandard | Face colors in the 3MF Materials Extension | 3MF viewers show the colors; Bambu Studio asks which filament each color uses |
| OBJ with vertex colorsInterchange | Each triangle's corners carry its color; vertices split so faces never blend | Bambu Studio and MeshLab |
| GLBViewing | Vertex colors | A viewer, Blender or a game engine |
| STLOne color | None: the shape alone | Any slicer, for a one-color print |
Convert a texture to vertex color
From a textured model to a printable multicolor file.
- 1
GLB, glTF, FBX, 3MF, or OBJ with its MTL and textures, from your device or your Library; STL and PLY open for a one-color print.

- 2
Take the suggested count, set your nozzle, and match swatches to your spools.
- 3
Set the print height and your printer, then download the 3MF for your slicer.

Limits of texture to vertex color
Color follows the mesh, so detail depends on how finely the surface is divided.
Detail stops at a triangle
Each triangle gets one color; a low-poly model shows blocky borders where the texture had fine lines. For a one-color print, DetailForge cuts those painted lines into the surface instead: 0.3, 0.5 or 1 mm wide, 0.1 to 1 mm deep (0.4 by default).
Holes are patched, not rebuilt
Small holes are closed and keep the color of the face beside them; a badly broken model needs the repair tool before it prints.
Base color only
Metalness, roughness and normal maps do not change the filament a surface gets.
Slicer import is read from source, not run
The paint_color layout follows the Bambu Studio and PrusaSlicer source; the optional filament-color settings file is the part not yet opened in a running slicer, so untick it if your slicer complains.
When the colors need more work
When the colors need cleaner regions or the model needs work first.
Cleaner color regions
Multicolor 3D printing prep rebuilds a model with Hitem3D into 2–8 filament regions with clean borders, for credits.
Stand it on a base
The 3D print base generator joins the model to a base as one solid, with its own colors.
Check it first
The 3D model repair tool shows holes and thin walls on the model and fixes them in a single pass.
Too few triangles
3D remesh rebuilds the mesh denser so color borders follow the texture more closely.
Check the model first
The free online 3D viewer shows the texture, UVs and triangle count.
Questions about texture to vertex color
Answers about turning textured models into multicolor prints.
Convert your model now
Open a textured model and download a multicolor 3MF in your browser, free.