GLB, glTF, OBJ, STL, FBX, PLY · up to 150 MB · or drop it here
Open a model to build lighter levels of detail for games and the web.
Free polygon reducer
Cut a model’s triangle count for games, the web or AR. The polygon reducer runs in your browser with meshoptimizer: pick 50%, 25%, 10% or 3%, compare the wireframe, and download a GLB with its textures kept.
One chest at four levels of detail
The Hunyuan3D 3.1 Rapid chest run through this reducer at 25%, 10% and 3%, with the triangle counts the tool reported. Posters show the wireframe; open a card to orbit the textured GLB.
Original: 26,942 triangles
Hunyuan3D 3.1 RapidThe source mesh, used as LOD0 up close.
25% level: 6,734 triangles
Polygon reducerThe first cut removes the flattest areas of the wood panels; the outline of the chest holds.
10% level: 2,690 triangles
Polygon reducerCarved detail starts to soften, a fair trade for a prop seen from across a room.
3% level: 1,294 triangles
Polygon reducerThe target was 808. Edges on texture seams stay locked so the texture does not tear, which stops this chest at 4.8% of its original triangles.
Watch the polygon reducer cut a sample chest
A recording of this page, sped up about 1.2 times.
Wireframe on, then 50% and 3%
Try with a sample model loads the 26,942-triangle chest. The recording turns on Wireframe, reduces to 50% (13,470 triangles) and then to 3%, where the count stops at 1,294.
Simplification
How the reducer keeps a model usable
Simplification removes triangles where the surface is flattest first.
UV seams are locked
Borders along UV seams stay in place, so textures do not tear.
Before and after counts
The tool shows the triangle count before and after each reduction.
Wireframe preview
Check the reduced mesh in wireframe and switch between Original and Reduced before downloading.
The polygon reducer in numbers
Keep 50%, 25%, 10% or 3% of the triangles.
Open GLB, glTF, OBJ, STL, FBX or PLY.
The reduced model downloads as GLB with textures kept.
The reducer runs in your browser; the file never leaves your device.
Make a lower-poly version
One reduction per level; repeat for a full LOD chain.
- 1
GLB, glTF, OBJ, STL, FBX or PLY from your device, or one of your own models from your Library.

- 2
50%, 25%, 10% or 3% of the triangles.
- 3
Check the wireframe and the new count, then download the GLB, or continue with it to compress, UV unwrap, paint or convert it without downloading.

Limits of the reducer
Reduction keeps the triangle layout; it does not rebuild it.
Not a retopology
For clean quads or an exact face budget, use 3D remesh instead.
Detail fades at 3%
Small features collapse at the lowest level.
Output is GLB only
Use Convert format next for another file type, without downloading first.
When reducing is not enough
Two tools rebuild the mesh instead.
Questions about the reducer
Answers about browser-side mesh simplification.
Reduce your model now
Open a model and download a lighter GLB in your browser.